• Nanaimo, BC · In-home consultations

  • 250-713-2145

  • Mon–Fri 9 am–5 pm

Door finish samples, cabinet hardware, and a deep soft-close drawer
How it's built

Design choices & what comes standard

The same care goes into every path — reface, partial, or full custom. Here’s how a kitchen comes together, the finishes you choose, and what’s in every single one.

See what it costs
The process

How a Birdseye kitchen comes together

1 A Birdseye client appointment booklet and a tape measure on a kitchen table
Stage one · free, no obligation

We come to you

Before anything is designed, we come and see the actual room.

  • We look and we listen. The layout, the boxes, the bits that annoy you every morning — and what you’d want instead.
  • We measure properly. Everything gets measured on the spot, so what follows is real rather than rough.
  • We’ll tell you the truth. Including when not to spend the money — if a reface will do it, we’ll say so.

There's no charge for the visit and no obligation at the end of it.

2 A 3D design of a Birdseye kitchen in oak and painted white, showing the full layout before it is built
Stage two · design, finishes & quote

You see it before you commit

This is where the kitchen gets decided — the shape of it, the look of it, and what it costs.

  • A 3D design you can walk through. For a full or partial kitchen, we model your layout so you can see the finished room before a single box is built.
  • Door style, colour and hardware. Chosen against your countertops, your flooring and the light your kitchen actually gets — so it all sits together.
  • A clear, itemised quote. You get it in writing, and you approve it before anything is ordered.

Nothing is ordered and nothing is built until you’ve said yes to the design and the number.

3 Dawson fitting a door to a maple upper cabinet during a Birdseye install
Stage three · build & installation

Built to fit, then fitted by us

Your cabinets are made to order for your room — and the people who built them are the people who install them.

  • Made to order, to your measurements. Nothing is pulled off a shelf.
  • Plan on eight to ten weeks from signing to your start date while your cabinetry is made.
  • Our own small team installs it — no subcontractors — and most installs run a week to a couple of weeks, depending on scope.

Jamie is hands-on through the build and the install, start to finish.

Door styles & finishes

The look is yours to choose

Whether you want clean modern lines, classic Shaker warmth, or something in between, we work with a wide range of door styles and finishes. The right choice depends on the rest of your home, the light in your kitchen, and how you want the space to feel — and we’ll help you find it.

Painted Lacquer door sample in sage green and grey tones
Painted Lacquer

Smooth, factory-sprayed colour in any shade — one of the most popular choices.

Solid Wood Shaker door samples in a range of wood species and stains
Solid Wood Shaker

Classic framed shaker doors in real solid wood, stained or clear-coated to let the grain show. Your choice of wood species and stain, with a range of inside-edge profiles to fine-tune the look.

Soft-Matte Flat Panel door samples in black, grey, white, and taupe
Soft-Matte Flat Panel

Silky-smooth, minimal, modern, and easy on fingerprints.

Composite Wood Prints door sample, a stack of wood-look panels
Composite Wood Prints

Durable wood looks at a friendlier price.

PVC / Thermofoil door sample with a fan of colour options
PVC / Thermofoil

Inexpensive, seamless, wipe-clean, and hard-wearing.

Solid Wood Veneer door sample in walnut, maple, oak, and cherry
Solid Wood Veneer

The richness of walnut, white oak, cherry and more.

Real Birdseye door and finish samples. Colours and species shown are a selection.

What comes standard

Included in every kitchen — not sold as upgrades

Every kitchen we build includes these as a baseline.

A BLUM drawer fully extended on its runners, with the metal drawer side and BLUM badge visible
BLUM MERIVOBOX drawers

Soft-close, full extension, rated to 125 lb. The drawers you open ten times a day shouldn’t be the part that wears out first.

The corner of a white melamine Birdseye cabinet box, edge-on — the plywood laminations of the box beside a particleboard edge
Plywood box construction

Every box we build starts with a plywood core, which holds a screw far better than particleboard and doesn’t swell when it gets wet. Two standards to choose from, at no difference in quality:

  • ⅝” pre-finished birch plywood — A warm, natural birch interior, pre-finished so it’s ready to live in the day it goes in.
  • ⅝” white melamine with a plywood core — A bright, wipe-clean white interior over the same plywood core.
A BLUM soft-close concealed cabinet hinge, photographed on its own
BLUM soft-close hinges

Quiet, adjustable, and built to last. The European hardware standard, on every door we hang — and the reason your door gaps still line up years later.

Ready to make it yours?

See a real cost range in two minutes, or book a free, no-obligation in-home visit.